Airxcel AHE-125-DN1, Руководство по установке

Страница: 9 / 35

Fluid Expansion Bottle Fluid Expansion Bottle
©Aqua-Hot®
125DN Installation Manual REV 220419
©Aqua-Hot®
125DN Installation Manual REV 220419
p. 15 p. 14
Mounting the High Altitude Bypass
The High Altitude Bypass is to modify the diesel fuel amount
when the RV is at an elevation of over 5,000 ft.
• Reference the following illustrations below for mounting
the High Altitude Assembly to the burner.
• Fuel pump is required to be installed horizontally.
• It is recommended to use a minimum of three mounting
holes.
• Do NOT mount the fuel pump higher than the fuel inlet on
the burner (see Figure 7 on Page 8 and the Fuel System
section pages 40-44 for reference).
High Altitude Bypass
Fuel Pump
Fuel Solenoid
High Altitude
Bypass Bracket
Figure 25
Line to Burner
Line From
Fuel Filter
Check
Valve
Orifice
High Altitude Bypass Assembly
Figure 26
High Altitude Bypass Bracket Dimensions
Ø 0.26in (x5)
6.00 in
5.25 in
2.25
1.50
0.85
0.60
3.00 1.50
2.40
1.50
0.76
1.40
1.50
TOP
LEFT SIDE
1.75
0.71
1.00
2.00
Ø 0.20
Pump Stud
Ø 0.19 (x1)
0.05 in
High Altitude Bypass Bracket
High Altitude Bypass
Figure 27
High Altitude Bypass