Airxcel AHE-125-DN1, Руководство по установке

Страница: 7 / 35

Support and Clearance Component Cut-Aways
©Aqua-Hot®
125DN Installation Manual REV 220419
©Aqua-Hot®
125DN Installation Manual REV 220419
p. 11 p. 10
1. Combustion Air Fan
2. Fluid Outlet
3. Fluid Inlet
4. Combustion Chamber
5. Circulation Pump
6. Exhaust Gas Temperature Sensor
7. Exhaust Outlet
8. Control Unit
9. Burner Motor
10. Fuel Inlet
11. Combustion Air Inlet
12. Fuel Pump
13. High Altitude Bypass Assembly
1 3 2
5
Figure 9
5
1 3 2
10
6
8
9
7
Figure 7
4
9
8
Figure 8
4
5
11
Support and Clearances
Make the following considerations when supporting the
Aqua-Hot to ensure its most optimal operation and location.
Dimensions for the mounting tabs are shown below.
•
Ensure that the floor of the mounting location can support
at least 70lbs.
• Use a #10 screw (5mm) to secure the Aqua-Hot in place on
the RV floor. Use at least 1 screw per mounting tab (3 tabs).
• The best place for the Aqua-Hot heating system is in a
cabinet or storage space, making sure there is ample
space to remove the service panels on the top and side.
Installing the Aqua-Hot
Install the Aqua-Hot in a compartment which protects the
unit and allows service access to the top and front panel of the
Aqua-Hot.
1. Reference the following illustrations below for mounting
information.
2. Secure the Aqua-Hot to the RV floor using appropriate
mounting hardware to suit flooring material and tolerances.
3. The Aqua-Hot is best placed where easy access to the top
and front is guaranteed for service.
Aqua-Hot
Mounting Tab x3
Front
Connections
0.75”
Center-to-center
Mounting Tab Detail
.196” Ø (#10)
Service Clearance
8” minimum
Service Clearance
4” minimum
Figure 12
Figure 13
TOP View
TOP View
SIDE View
Figure 14
Figure 15
Edge of Installation Area
Aqua-Hot Diesel Burner
13
Figure 10
12