Service and maintenance
page 18
Washing the
hydroSorp®
filter
The
hydroSorp®
filter consists of a high-grade ester foam material. The sponge-like ma-
terial
can be washed out
and can therefore be almost completely regenerated. The filter
should be washed at
regular
, not too long intervals. This will substantially increase the life
of the filter mats.
Attention
When used in kitchens:
hydroSorp®
filter mats are able to trap and
hold a large quantity of grease, so can heavily contaminate a wash-
ing machine! If necessary, have the filters washed by a specialist
cleaning company.
1. Remove the filter as described in the previous section.
2. Wash the filter in a washing machine at a maximum of 90 °C using mild detergent
and the delicates wash cycle, do not spin!
3. Then leave the filter to drip dry.
4. Insert filter mats, fit the casing halves as in the previous section.
Cleaning the outer case
Care of the
aereus® arco
is essentially restricted to regular cleaning of the outer case.
Cleaning of the case consists solely of wiping with a cloth and suitable cleaning agent. If in
doubt, refrain from using the cleaning agent.
5.2 Maintenance
Attention
Maintenance work should be carried out by a trained electrician only.
Make sure you also pay attention to the safety instructions in section
2.5, in particular.
Replacement and wearing parts can be obtained
on request
from airtec competence
GmbH. The manufacturer recommends you keep a stock of replacement and wearing
parts as necessary.
Servicing/maintenance of the
aereus® arco
should be done
once a year
. In addition to a
function check of the device, this procedure should include a check and, if necessary, re-
placement of all replacement and wearing parts.
