Service and maintenance
page 17
Replacing
hydroSorp®
filter mats
Caution
Heavily soiled pre-filters increase the risk of fire!
Regularly check the degree of soiling of the filter, replace dirty filters.
Check
the pre-filter at
regular intervals
and replace if particularly dirty. The degree of
soiling depends solely on
local conditions
so make sure you follow a
servicing cycle
that is appropriate for the conditions
.
Fig. 6: Pre-filter
1. Undo the Allen screws at both ends of the handle.
2. Completely remove the two halves of the stainless steel casing upwards.
3. Remove the filter mats from the frame.
4. Insert new filter mats and re-fit the casing halves in the same order.
