AirStage ASHE07GACH, Руководство по установке, Страница: 16 / 144

En-15
10. ERROR CODES
If you use a wired type remote controller, error codes will appear on the remote controller
display. If you use a wireless remote controller, the lamp on the photodetector unit will output
error codes by way of blinking patterns. See the lamp blinking patterns and error codes in the
table below.
Error indications
Wired Remote
Controller Error
CODE
Error contents
OPERATION
lamp (green) TIMER lamp
(orange)
FILTER lamp
(red)
(1) (2)
Remote controller
communication error
(1) (4)
Network communication
error
(1) (6)
Peripheral device
communication error
(2) (6) Address setting error
(2) (9)
Connection unit number
error in wired remote
controller system
(3) (1)
Indoor unit power supply
abnormal
(3) (2)
Indoor unit main PCB
error
(3) (10)
Indoor unit
communication circuit
(wired remote controller)
error
(4) (1) Room temp. sensor error
(4) (2)
Indoor unit Heat Ex.
sensor error
(5) (1)
Indoor unit fan motor1
error
(5) (2)
Coil (Expansion value)
error
(5) (3) Water Drain Abnormal
(9) (15) Outdoor unit error
(13) (1) RB unit error
Display mode : 0.5s ON / 0.5s OFF
: 0.1s ON / 0.1s OFF
( ) : Number of fl ashing
Wired Remote Controller Display
UTY-RNKY / UTY-RNKG / UTY-RNKYT (3-wire type)
Error code
URY-RNRY / UTY-RNRG (2-wire type)
2-digit numbers are corresponding to
the error code in the preceding table.
Touch the [Next Page] (or [previous page])
to switch to other indoor unit information.
Error icon
Touch the [Status]. Touch the [Error Information].
For more information, refer to the installation manual of the remote controller.
9377773098-01_IM.indb 15 9377773098-01_IM.indb 15 7/12/2012 3:05:27 PM 7/12/2012 3:05:27 PM