AirStage ARXB07LALH, Руководство по обслуживанию

Страница: 21 / 207

<Setting screen>
(3) Switch to the <Details setting screen> by pressing "Optional Setting" on the setting screen.
<Details setting screen>
(4) Send (start) test run by pressing "Start" and then pressing "OK" on the details setting screen. Test run continues for 60 minutes.
During sending, the slave screen shown below is displayed. When sending is completed, the sending slave screen and details setting
screen are closed.
To interrupt test run, select the device being test run and execute an
operation stop command.
(*) At the monitor screen, test run is reset by stopping operation
of the objective devices by pressing "OFF".
(*) Or test operation is reset by stopping operation of the objective
devices by pressing "Off" of Operation and then pressing "OK"
on the setting screen.
01-13
(3)
(4)
(5)
( * )
Cancel
Off
On
OK
Transferring data. Please wait.
On
On
Reset
Cancel
Stand by (Defrost)
Stand by (Oil Recovery)
Test Operation
Start
Air Flow Direction
Economy Anti Freeze Filter Sign
Operation Test
Up
Down
Swing
Swing
Left Right
Off
Off
Special State
Status: On
1 2 3 4 5
1
2
3 4
Setting Optional
Cancel
OK
On
Off
Auto
Auto
Cool
Dry
Fan
Heat
Operation
Controlled
High
Med
Low
Quiet
Meeting Room
24.0 C
operation
R/C Prohibition
Mode Set Temp. Fan
Optional
Setting
All
On/Off
Filter
Timer
Temp.
Mode
On
10/11.2008.Mar. 02:20 PM
10/11.2008.Mar. 02:20 PM
Air Flow Direction
Economy
Anti Freeze
Filter Sign
Test Operation
Control Unit :
Operation Setting
Operation Setting
OK
Status: On