_______________________________________________________
4800B Series
AP User’s Guide
Quick-Start Setup
DOC-710-005310-A0
Installing the Aironet 4800B Series Access Point
Follow the instructions below to install the Aironet 4800B Series Access Point.
1.
Adjust the antennas.
*
For maximum range, make sure the antennas on your Access Point point straight up or straight down,
no matter where your Access Point is mounted.
If you keep your Access Point on a table or a desk, turn the antennas so they point straight up. If you
mount your Access Point on a wall or a pole, turn the antennas so they are vertical, even though the
Access Point is on its side. If you mount your Access Point on the ceiling, turn the antennas so they
point straight down.
2.
Connect the Ethernet cable from your wired LAN to your Access Point.
Make sure the AP is not powered up when you connect your network cable.
*
The AP4810B has one antenna. The AP4822B and AP4823B have reverse TNC connectors so you can
attach a wide range of antennas.
