manualshive.com logo in svg

Aironet AP4800B series, Руководство пользователя

Поделиться
Скачать
Aironet AP4800B series Скачать руководство пользователя страница 136

               _______________________________________________________ 

4800B Series

AP User’s Guide

User Manager Setup Page

DOC-710-005310-A0

User Manager Setup

Navigation

Summary Status > Setup > Services/Security > Security Setup > User Manager > User Manager Setup

Security

This page requires an Administrator with Identity, Firmware, and Write capabilities.

User Manager Setup Page

Overview

This page allows you to turn on the system security features.

Settings

User Manager

Click Enabled to turn on system security. Click Disabled to turn off system security. To enable, an
Administrator user with Write, Identity, and Firmware capabilities must already be defined.

Allow Read-Only Browsing without Login

Click yes to allow any user to view the AP’s basic screens. Click no to restrict access to all of the AP’s
screens to only the users in the user list.

Protect Legal Credit Page

Click yes to restrict access to the Legal Credits page to users in the user list. Click no to allow any user
to view the Legal Credits page.

Содержание AP4800B series

























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды