AirLive WN-151ARM Скачать руководство пользователя

Страница: 113 / 119

AirLive WN-151ARM User’s Manual

113

IP address

IP (Internet Protocol) is a layer-3 network protocol that is the basis of all Internet communication. An IP

address is 32-bit number that identifies each sender or receiver of information that is sent across the Internet.

An IP address has two parts: an identifier of a particular network on the Internet and an identifier of the

particular device (which can be a server or a workstation) within that network. The new IPv6 specification

supports 128-bit IP address format.

IPsec

IP Security. A set of protocols developed by the IETF to support secure exchange of packets at the IP layer.

IPsec has been deployed widely to implement Virtual Private Networks (VPNs). IPsec supports two

encryption modes: Transport and Tunnel. Transport mode encrypts only the data of each packet, but leaves

the header untouched. The more secure Tunnel mode encrypts both the header and the payload. On the

receiving side, an IPSec-compliant device decrypts each packet.

LACP (802.3ad) Trunking

The 802.3ad Link Aggregation standard defines how to combine the several Ethernet ports into one

high-bandwidth port to increase the transmission speed. It is also known as port trunking. Both device must

set the trunking feature to work.

MAC

(Media Access Control)

MAC address provides layer-2 identification for Networking Devices. Each Ethernet device has its own unique

address. The first 6 digits are unique for each manufacturer. When a network device have MAC access

control feature, only the devices with the approved MAC address can connect with the network.

Mbps

(Megabits per Second)

One million bits per second; a unit of measurement for data transmission

MESH

Mesh is an outdoor wireless technology that uses Spanning Tree Protocol (STP) and Wireless Distribution

system to achieve self-forming, self-healing, and self-configuring outdoor network. MESH network are able to

take the shortest path to a destination that does not have to be in the line of site.

MIMO

(Multi-Input-Multi-Output)

A Smart Antenna technology designed to increase the coverage and performance of a WLAN network. In a

MIMO device, 2 or more antennas are used to increase the receiver sensitivity and to focus available power at

intended Rx.

Содержание WN-151ARM
























































































































Результаты поиска

Содержание WN-151ARM

Отзывы:

Похожие инструкции для WN-151ARM

Бренды по названию

Популярные бренды

AirLive WN-151ARM, Руководство пользователя

Результаты поиска

Содержание WN-151ARM

Отзывы:

Похожие инструкции для WN-151ARM

Бренды по названию

Популярные бренды