AirLive WN-151ARM Скачать руководство пользователя

Страница: 42 / 119

AirLive WN-151ARM User’s Manual

3.6 Mode Screen

Use this screen to change the mode between Router mode and Modem (Bridge) mode.

Figure: Mode Screen

Select the desired option, and click "Save".

Router (Modem

+ Router)

Both the ADSL Modem and the Router features are operational. In this

mode, this device can provide shared Internet Access to all your LAN

users. Also, by default, it acts a DHCP Server, providing an IP address and

related information to all Wireless and LAN users.

Modem

Only the ADSL Modem component is operating.

•

All Router features are disabled. This device is "transparent" - it does

not perform any operations or make any changes to the network traffic

passing through it.

•

You need to have a DHCP Server on your LAN to provide IP addresses

to the Wireless clients using this Access Point.

•

All traffic received on either the Wireless or LAN interface will be sent

over the ADSL connection.

Notes:

•

Generally, you should NOT use modem mode. Only select this mode if you are sure this is what you want.

•

After changing the mode, this device will restart, which will take few seconds. The menu will also change,

depending on the mode you are in.

•

The Wireless Access Point can function in either Router or Modem mode. But generally it is not a good

idea to combine a Modem with an Access Point because all data received from the wireless stations will

be sent over the modem connection. (Since the modem is transparent, it does not examine the traffic to

determine whether the traffic is for the LAN or the WAN.)

•

For details on using Modem Mode, see Chapter 8.

Содержание WN-151ARM
























































































































Результаты поиска

Содержание WN-151ARM

Отзывы:

Похожие инструкции для WN-151ARM

Бренды по названию

Популярные бренды

AirLive WN-151ARM, Руководство пользователя

Результаты поиска

Содержание WN-151ARM

Отзывы:

Похожие инструкции для WN-151ARM

Бренды по названию

Популярные бренды