AirLive WN-151ARM Скачать руководство пользователя

Страница: 112 / 119

AirLive WN-151ARM User’s Manual

112

FTP

File Transfer Protocol. A standard protocol for sending files between computers over a TCP/IP network and

the Internet.

Fragment Threshold

Frame Size larger than this will be divided into smaller fragment. If there are interferences in your area, lower

this value can improve the performance. If there are not, keep this parameter at higher value. The default size

is 2346. You can try 1500, 1000, or 500 when there are interference around your network.

Full Duplex

The ability of a networking device to receive and transmit data simultaneously. In wireless environment, this is

usually done with 2 or more radios doing load balancing.

Gateway

In the global Internet network, the gateways are core routers that connect networks in different IP subnet

together. In a LAN environment with an IP sharing router, the gateway is the router. In an office environment,

gateway typically is a multi-function device that integrates NAT, firewall, bandwidth management, and other

security functions.

Hotspot

A place where you can access Wi-Fi service. The term hotspot has two meanings in wireless deployment.

One is the wireless infrastructure deployment, the other is the Internet access billing system. In a hotspot

system, a service provider typically need an authentication and account system for billing purposes, and a

wireless AP network to provide access for customers.

IGMP Snooping

Internet Group Management Protocol (IGMP) is a Layer 3 protocol to report IP multicast memberships to

neighboring multicast switches and routers. IGMP snooping is a feature that allows an Ethernet switch to

"listen in" on the IGMP conversation between hosts and routers. A switch support IGMP snooping has the

possibility to avoid multicast traffic being treated as broadcast traffic; therefore, reducing the overall traffic on

the network.

Infrastructure Mode

A wireless network that is built around one or more access points to provide wireless clients access to wired

LAN / Internet service. The opposite of Infrastructure mode is Ad-hoc mode.

Содержание WN-151ARM
























































































































Результаты поиска

Содержание WN-151ARM

Отзывы:

Похожие инструкции для WN-151ARM

Бренды по названию

Популярные бренды

AirLive WN-151ARM, Руководство пользователя

Результаты поиска

Содержание WN-151ARM

Отзывы:

Похожие инструкции для WN-151ARM

Бренды по названию

Популярные бренды