AirLive WN-151ARM Скачать руководство пользователя

Страница: 19 / 119

AirLive WN-151ARM User’s Manual

1. Choose an Installation Site

Select a suitable place on the network to install the WN-151ARM.

Notes:

For best Wireless reception and performance, the WN-151ARM should be positioned in a central location with

minimum obstructions between the WN-151ARM and the PCs.

Also, if using multiple Access Points, adjacent Access Points should use different Channels.

2. Connect LAN Cables

Use standard LAN cables to connect PCs to the Switching ports on the WN-151ARM. Both 10BaseT

and 100BaseT connections can be used simultaneously.

3. Connect

ADSL

Cable

Connect the supplied ADSL cable from to the ADSL port on the WN-151ARM (the RJ11 connector) to

the ADSL terminator provided by your phone company.

4. Power

Connect the supplied power adapter to the WN-151ARM and plug into a power outlet.

Note: Use only the power adapter included with this device.

Using a different one may cause hardware damage.

5. Check the LEDs

•

The

Power

(Orange) LED should be ON.

•

For the LAN (PC) connection, the

LAN

LED should be ON

•

The

Wireless

(Blue) LED will be turned ON once there’s client connection established.

•

The

Internet

(Blue) LED may be OFF. It will be ON after configuration.

•

The

ADSL

(Green) LED should be ON if ADSL line is connected and available.

6. Router’s default IP

•

The default IP address of router’s LAN port is:

IP Address:

192.168.1.254

Subnet Mask: 255.255.255.0

•

For Web Management, please configure client PC as DHCP client to obtain IP address from

WN-151ARM.

•

After the IP assignment is assigned, please enter the router’s IP address “192.168.1.254” in Web

browser to manage the router, type the proper user name and password for authentication.

7. Default user name and password

•

User’s

name:

admin

•

Password:

airlive

Содержание WN-151ARM
























































































































Результаты поиска

Содержание WN-151ARM

Отзывы:

Похожие инструкции для WN-151ARM

Бренды по названию

Популярные бренды

AirLive WN-151ARM, Руководство пользователя

Результаты поиска

Содержание WN-151ARM

Отзывы:

Похожие инструкции для WN-151ARM

Бренды по названию

Популярные бренды