![background image](http://html1.mh-extra.com/html/airlessco/1110e/1110e_service-and-operation-manual_2877326030.webp)
FIG. 14
NOTE:
The Cog Belt System does not require
alignment. When upper sheave is placed on
motor shaft it is pushed on until a positive stop is
reached. The set screws (Fig. 13, Item 115-041)
are then loctited. The lower pulley is placed on
gearbox and held in place with keyway and
snap ring (Fig. 13, Item 100-332) The flange on upper
sheave holds the belt in alignment and the belt self
aligns on lower pulley eliminating having to align.
SUCTION Assly. (810/1100) 5 gal. - P.N. 301-090-99
SUCTION Assly.
(810/1100)
- 55 gal. - P.N. 301-543-99
FIG. 16
FIG. 15
Suction Hose Ass'y
(includes items 1-5)
Inlet Strainer
Suction Tube
Hose Clamps (2)
Hose
Elbow
Return Pipe
Elbow
Whip
Elbow **
Reducer**
Fitting
Suction Nut
301-517
141-008
301-514
301-516
301-513A
100-165
188-377
100-128
100-012
100-126
100-385
187-017
187-018
*
1
2
3
4
5
6
7
8
9
10
11
12
FIG. 14 PARTS LIST
ITEM # PART # DESCRIPTION
FIG. 16 PARTS LIST
ITEM # PART # DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
141-008
301-545
301-516
301-544
100-165
188-377
100-128
100-012
100-126
100-385
187-017
187-018
Inlet Strainer
Suction Tube
Hose Clamps (2)
Hose
Elbow
Return Pipe
Elbow
Whip
Elbow **
Reducer**
Fitting
Suction Nut
REPLACEMENT OF BELT:
1.
Remove cover (Fig. 13, Item 301-321 ) from unit.
2.
Remove Tensioner Assembly (Fig 14). Then loosen screws (Fig. 13, Item 301-099). Move gearbox forward
to allow removal and replacement of belt.
3.
Retighten screws into gearbox until they bottom out. (Fig. 13, Item 301-099) This will align gearbox correctly.
4.
Replace tensioner with bolts and leave loose to allow adjusting belt tension.
5.
Tighten belt as shown in Figure 14. When properly tightened the deflection play should be 1/4 inch when
pushing hard with thumb. (20 ft/lbs)
NOTE:
When placing belt on pulleys and inserting the tensioner against belt, ensure cogs on belt are engaged into cogs
on pulleys before tightening belts. Rotating upper pulley while holding the tensioner against the belt will allow proper en-
gagement of cogs prior to tightening.
301-517-99
REPLACEMENT OF BELT/BELT ADJUSTMENT
28
Содержание 1110E
Страница 24: ...22 SL1500 Pump Parts Diagram 3...