AirCell ST 3100, Руководство по установке

Страница: 23 / 59

4.5. Maintenance and Continued Airworthiness
Design and manufacturing of the AirCell
®
ST 3100 System allows for
“On-Condition
Maintenance.”
On-condition maintenance means that no periodic service requirements are
required to maintain continued airworthiness of the system. No maintenance is required until the
equipment does not perform the intended function. Cable harness repair, RF cable maintenance,
and antenna replacement can be accomplished in the field. Refer to Appendix A for additional
detailed information on maintenance, continued airworthiness and troubleshooting procedures.
Consult AirCell
®
LLC Technical Support to help evaluate any problem that is not resolved by
following the troubleshooting procedures in Appendix A. A Return Material Authorization (RMA)
is required for all repairs or exchanges on items returned to AirCell
®
. Return the Transceiver to
the factory for repair and return or call Customer Service and request that a serviceable unit be
sent to you before removing the installed unit. After factory repair or receiving the serviceable
Transceiver, consult the Installation Manual (800-10680) for post-installation checkout and
procedures to verify proper system operation in the aircraft and correct phone numbers. Be sure
to activate the replacement serviceable unit (call Customer Service @ 1-888-286-9876)
before
testing it for operation as the previous Electronic Serial Number (ESN)/Phone Number
combination will no longer be valid.
Testing and Setup
Page 4-2
Section 4
800-10680-C, May 2007