Airbus TDM880i, Инструкция по эксплуатации

Страница: 24 / 37

P A R A M E T E R R E F E R E N C E ( T D M 8 8 0 I S P E C I F I C P A R A M E T E R S )
PS11129BENAC01 TDM880i - Instruction Manual
24/36
This document is the property of Airbus DS SLC and should not be copied or circulated without permission.

Periodic reset
The Periodic reset has the following configuration options (Figure 4):
• Enable/disable Periodic Reset feature
• Time interval between controlled periodic resets

Location tracking
The Tracking feature has the following configuration options:
• Enable/disable tracking feature
• Maximum total amount of entries in track
• Time interval between stored tracks - the time trigger - expressed as minutes
• Distance delta between stored tracks - the distance trigger - expressed as meters.
Table 7 Location tracking parameters
TETRA Terminal Programming Tool (TPT)
The TPT can be used to configure the Location tracking feature in two ways:
• to configure the set of SSI from which the configuration SDS messages are allowed
• to configure the actual parameters required by the Tracking functionality.
Allowed SSI configuration
Figure 5 Tracking OTA numbers
The end user can insert five different numbers into the Tracking OTA numbers fields. The OTA configuration of the
Tracking functionality is allowed from these numbers.
PARAMETER DESCRIPTION VALUES
Enable/Disable Execution control 0 = off
1 = enabled
Maximum Amount of entries Amount of entries reserved for track storing 0<=200<=500
Time Trigger Time delta between stored locations 0<x<(2^31)-1
Distance Trigger Distance delta between stored locations 0<x<(2^31)-1