Airbus TDM880i, Инструкция по эксплуатации

Страница: 28 / 37

P A R A M E T E R R E F E R E N C E ( T D M 8 8 0 I S P E C I F I C P A R A M E T E R S )
PS11129BENAC01 TDM880i - Instruction Manual
28/36
This document is the property of Airbus DS SLC and should not be copied or circulated without permission.
AT interface
Parametrization of the Alerting Feature:
Table 11 Alerting: AT interface
SDS interface
Parametrization of the Alert functionality over an SDS message requires that the message format presented below
is used.
Table 12 Alerting: SDS interface
DESCRIPTION COMMAND RESPONSE
Read Alert Status +CXALERT? +CXALERT: <alert in 32
hexadecimal coding>,
(<alert statuses 1=on 0=off,
starting with alert 0,
grouped in 4 alerts>)
Test +CXALERT=? -
Note: OTA supports the configuration of a single alert per message. Configuring multiple alerts requires the
usage of multiple messages.
FIELD TYPE
Protocol Identifier 0x46
Sub-protocol Identifier 0x5
PDU Type 4 bits : 0011
LIP Enabled and Allowed for all
numbers 4 bits : 0000 = both disabled, 0001 = LIP enabled, 0010 = Allowed from all
numbers, 0011 = Both enabled
Sub block count 8 bits : Number of sub-blocks, single block update supported currently
Sub block ID 8 bits : reserved
Sub block size 8 bits : reserved
Message type 8 bits : 0x0 = No message, 0x01 = SDS-1, 0x02 = SDS-4
Reserved 8 bits
SDS-4 Message length 16 bits : Conditional, see message type.
SDS-4 Protocol ID 8 bits: reserved. 0x00. Conditional, see message type.
SDS-4 Message type 8 bits: 0x03. Conditional, see message type.
SDS-4 Message reference 8 bits: 0x01. Conditional, see message type.
SDS-4 Coding scheme 8 bits: 0x01. Conditional, see message type.
SDS-4 Message 60 chars. Conditional, see message type.
SDS-4 <reserved padding> 16 bits.
Destination address: TETRA
number 32 bits.
Destination address: MCC 16 bits.
Destination address: MNC 16 bits.
Destination address: TETRA
Number Type 8 bits.
Destination address: reserved
fields 24 bits.
SDS-1 status value 16 bits. Conditional, see message type.
Lifetime 16 bits. Alert lifetime in minutes.
Interval 16 bits. 0x001E = Default 30 seconds. Reserved.
Message sending mode 8 bits. 0x00 = one shot, 0x01 = Continous, 0x02 = Until success, 0x03 Requires
acknowledgement
Alert number 8 bits. Number of the alert to configure : 0<n<32