Airbus TDM880i, Инструкция по эксплуатации

Страница: 29 / 37

TDM880i - Instruction Manual PS11129BENAC01
29/36
This document is the property of Airbus DS SLC and should not be copied or circulated without permission.
P A R A M E T E R R E F E R E N C E ( T D M 8 8 0 I S P E C I F I C P A R A M E T E R S )
After a new configuration is retrieved, a special acknowledgement message is sent to the configuration sender. The
format of the acknowledgement is as follows:
Table 13 Acknowledgement message format

IGS feature
The IGS feature can be configured using the Mobile Parameterisation view shown in Figure 8.
Explanation of parametrization:
• The Power Off Timer gives the delay in seconds (0 - 600 s) to turn the radio off after the IGS signal has gone into
the low state.
FIELD DESCRIPTION
Protocol Identifier SDS_TL_GENERAL_OTA_ID, 0x46
Sub-protocol Identifier 0x05
PDU type 4 bits : 0000
Result code 4 bits : 0000 = OK, 0001 = invalid parameters, 0010 = Failed due buffer IO error
Note: If the IGS signal goes into the high state during this delay of the timer, the power off is cancelled.