©
A
ir
B
orne
W
ind
S
ports
P
ty.
L
td.
SECTION 4
Aircraft Operating Instructions Edge XT 912
NORMAL PROCEDURES
January 2014
Issue 2.4
Page 60
4.4.8
Insert Mast Lever
Insert the lever so that the flat section is facing toward the mast.
Figure 22 Section 4. Insert Mast Lever
4.4.9
Attach Mast Brace
Bring mast brace into position and allow the outer sleeve to slide into position. Install the top pip pin and
cap. Install lower pip pin and cap.
Figure 23 Section 4. Attach Mast Brace
4.4.10
Load Mast Lever
Once the lever is located correctly rotate the lever down 180
degrees until it is securely loaded. Fold the seat back up into
position.
Figure 24 Section 4. Load Mast Lever