![background image](http://html1.mh-extra.com/html/airborne-windsports/edge-xt-912-l-arrow-k-microlight/edge-xt-912-l-arrow-k-microlight_aircraft-operating-instructions_2876051106.webp)
©
A
ir
B
orne
W
ind
S
ports
P
ty.
L
td.
SECTION 8
Aircraft Operating Instructions Edge XT912
HANDLING & MAINTENANCE
January 2014
Issue 2.4
Page 106
3. The battery charging circuit is protected with a 20A fuse, which also terminates at the right
hand side of the mast block. The fuse holder is marked with the correct Current rating for the fuse.
A 10 Amp circuit breaker is located on the right hand side of the dash. The circuit breaker protects
the dash instrumentation and the DC socket.
8.12.1
Wing Daily Maintenance
If the wing is assembled and disassemble on a frequent basis the batten latch fittings should be
checked for security during assembly.
Latch fittings should be sharp and not rounded. Rounded edges can occur from unloading without
depressing the latch. Check the unloaded measurement of latch to body of the outer fitting is not less
than 2mm to maintain loaded retaining force.
Section 57.10.00 of the wing maintenance manual has further details if fittings are out of tolerance
WARNING
ALWAYS ENSURE THE BATTEN END FITTINGS ARE CLOSED AND LOADED SECURELY
BEFORE TAKE-OFF. BATTEN ENDS BECOMING UNLOADED DURING FLIGHT AT HIGHER
AIRSPEEDS MAY HAVE SERIOUS EFFECTS ON THE FLIGHT PERFORMANCE AND STABILITY
CHARACTERISTICS OF THE WING.