6 | IXG Quick Start Programming Guide
If the system contains Mobile Apps, the Gateway (IXGW-GW) is required. To add the Gateway to the system,
select Enable, then optionally edit its Station Name
, and review the other settings. Once configured, click
Save
.
Use the drop-down menu under Gateway Number to select the Gateway added in the previous step.
Gateway Selection
Gateway Registration
Station Information
Network Settings
Edit the Station Number and Name for each station in the system. The Station Name and Number are
typically only seen by stations within the same Unit for internal communication, but it is recommended to give
custom names to any Entrance or Door stations.
From the side menu, expand
Network Settings
and select
IP Address
. Each station can be manually
assigned an IP address, or click
Batch IP Address Configuration
near the top of the screen
to enter an IP
address range to automatically assign all stations.
Edit the
Admin ID and Password for each station, as well as optionally create an ONVIF and RTSP ID and
Password for each station.
It is recommended that the Admin ID and Password are not adjusted once
set
.
Identification
IP Address
ID / Password
(Optional)
For systems with the IXGW-GW Gateway Adaptor,
a DNS Address is required for the adaptor, and
optionally for all other stations. Consult the Network Administrator for more information if needed.
It is recommended to Enable and configure NTP settings for each station when possible.
For systems with
the
IXGW-GW
Gateway Adaptor
, it will have NTP enabled and an Aiphone NTP server address set by
default. Adjusting this default server address is possible, and recommended for sites with their own server.
DNS
NTP
For systems with the IXGW-GW Gateway Adaptor
, a
Default Gateway
must be added for the adaptor,
and optionally for all other stations. Consult the Network Administrator for more information if needed.
