13
IXW-MA Configuration
Station Numbers
Use the following steps for configuring the IXW-MA for use with the IXG Series. The IXW-MA has 10 configurable relay
outputs than can be used for several functions, including remote door release and external signalling. IXG Support Tool
v2.1.0.1 or later must be used.
Note that the IXW-MA is not compatible with the IXG-DM7-HID Entrance Panel, only IX
Series door stations.
The station number of any station interacting with the IXW-MA must be 3 to 5 digits long. For door release, this would be
the station number of the door station, as it is what sends the SIF event to the IXW-MA relay. To confirm or adjust station
numbers, expand
Station Information
on the side menu and select
Identification
.
SIF
In Advanced View
, found under
View
on the top menu, expand
Function Settings
on the side menu and select
SIF
.
The example shown will be setting up remote door release, in which these settings will primarily be adjusted for the door
stations, and not the master stations.
Enable
SIF Functionality
, enter
0100
for the Program Type
, set the IPv4 address to the IP address that will later be
assigned to the IXW-MA, enter
65014
for the Destination Port,
Enable
SSL, and select
Socket
as the Connection. Click
Save
before continuing to Transmission Trigger.
Transmission Trigger
Scroll to the right and select the Transmission Trigger that will send the SIF event. Continuing with the previous example,
Change Contact
should be selected for remote door release activation.
Relay Output Time
(Optional)
To increase the time the relay is closed on the IXW-MA when used for remote door release, expand
Option Input/Relay
Output
and select Relay Output. Scroll to the right and adjust the
Output Time
for the door station accordingly.
Once the previous steps are configured, each affected station will need to have the updated settings uploaded to it. For best
practice, upload to all station to ensure consistent and up to date settings. To upload the settings to each station, select
Connection
on the top menu and click Upload Settings.
Find more information on
page 8
.
Upload Settings.
