4
Danger
◆
Wiring
●
Be sure to turn OFF the mains prior to wiring to avoid an electric shock or a fire.
●
Make sure that cords and outlets are properly grounded to avoid an electric shock or a
fire.
●
Carry out wiring after you installed Controller to avoid an electric shock or a fire.
●
Wiring must be carried out by an expert electrician to avoid an electric shock or a fire.
●
Always use Y-shape or round crimp terminals when wiring Terminal Block to avoid an
electric shock or a fire.
Caution
Danger
◆
Handling/Operation
●
Assurance of work-site safety by operators themselves prior to power switching operation
is essential to prevent personal injury.
●
Never touch switching devices with moistened hands to avoid an electric shock.
●
Avoid touching the terminals of current-carrying Controller even during Tool is under
non-operating conditions to avoid an electric shock.
●
Avoid damage, mechanical stress, load to cords and never tuck them in forcibly to avoid an
electric shock.
●
Be sure to turn OFF the mains after each use.
●
Be sure that Controller rated voltage agrees with AC power source to avoid personal injury
and a possible fire.
●
Wires must be routed and fixed properly and securely to avoid personal injury and a fire.
