19
L. CONTR. (Fastening Number Count Operation Mode Selections)
Initial Setting
: LS1
・
Select Line Control Mode to be used during Fastening Number Count.
・
This setting is common among WORK No. 1~4.
・
Note that QL Terminal accepts inputs outside the operating range particularly specified using
this function.
LS1
・
All-the-time fastening number counting down ready condition will be rendered, and judgment
will be made on Limit Switch input. COUNT OK judgment will be given when the preset
fastening COUNT number is attained, and ready-to-start the next work fastening operation
status will be brought about when LS1 has been input and the old fastening number has been
cleared. If the preset fastening number is not attained at the time of LS1 input, COUNT
NOK judgment will be given. In this case, COUNT OK judgment will result when the
remaining fastening operation has been completed.
Work
Work Flow
LS1
Operating range
NOK handling range
