![background image](http://html1.mh-extra.com/html/aim/mxs-1-2-strada/mxs-1-2-strada_user-manual_2871711018.webp)
CHAPTER 5
34
35
MXS 1.2 STRADA
5.2.9 Trigger commands configuration
“Trigger Command” executes some specific actions on your MXS 1.2 Strada.
The commands available up to now are:
n
set next/previous page
n
show camera input page
n
reset alarms
n
activate pushbuttons 1-4
Other commands will be available in the next software/firmware releases.
You can define the condition that activates a Trigger Command.
To add a new command.
n
Press “Add new Command” (
1
)
n
You may use a combination of conditions for setting a Trigger Commands and choose if
the conditions are to be ALL valid or just one of them (
2-4
)
To set the new alarm:
n
define the Alarm name (
1
)
n
you may use a combination of conditions for setting an Alarm and choose if the conditions
are to be ALL valid or just one of them (
2-4
)
n
decide which action is to be trigged (
5
) among displaying a message or a timed popup
message, display a measure, switch a LED on or activate an output signal (CAN output page,
see the related paragraph)
n
decide the alarm ending condition (“Untill” –
6
) among: condition no longer met, the
device is turned off, a button is pushed or data are downloaded
n
“+” buttons you find right of the panel are to add new alarms (the top one) or to add new
actions to an alarm (bottom one)
n
when all operations have been performed press “Save” in “Create New Alarm Panel” and you
will come back to “Shift Lights and Alarm” page
MXS 1.2 STRADA OK.qxp_Layout 1 02/10/18 15:08 Pagina 35