44
45
MXS 1.2 STRADA
CHAPTER 5
To add a payload:
n
press “+Add new Payload” and “Set CAN Header details” appears;
n
fill in ID CAN (hex), available options are:
n
11 bits (normal address)
n
29 bits (extended address)
n
select the payload max bytes number (DLC ), available options are from 1 to 8 bytes
n
select the byte order according to the used processor, available options are:
n
Little endian for Intel processor
n
Big Endian for Motorola processor
n
set the sampling frequency among: 1,2, 5, 10 or 20 Hz
Please note: this function is for expert users only.
At very first configuration this panel shows up.
You may configure your device to transmit a CAN data stream, both on CAN1 and CAN2,
containing the channels required.
5.2.13 CAN Output configuration
MXS 1.2 STRADA OK.qxp_Layout 1 02/10/18 15:08 Pagina 45
