28
29
MXS 1.2 STRADA
CHAPTER 5
In order to define a Status Variable enter the proper TAB.
The Status variables can be used as any other channel, so they may be seen online, transmitted to
the CAN stream, recorded, used for triggering a command or for turning ON a LED or an Icon.
Mousing over the Status Variable a summary panel appears on the right as shown here below.
In Parameters page you can set optional GPS and/or optical beacon.
Mousing over the question marks a pop up message will explain you the working mode of:
n
GPS Beacon:
n
hold lap time for: the time period for which lap time is shown on your
MXS 1.2 Strada display
n
the track width: width that will be considered for any GPS point you set
n
Optical beacon:
n
ignore additional lap signal for: after receiving an Infrared lap signal,
the receiver does not detect another signal for the time period you fix in
the related box. This is very useful if more lap transmitters are placed nearby
on the side of the track.
5.2.7 Parameters configuration
MXS 1.2 STRADA OK.qxp_Layout 1 02/10/18 15:08 Pagina 29
