AIC TMU 500, Руководство по установке и обслуживанию, Страница: 27 / 68

G-27
Z-106164_EN ● 00
P
roduct
I
nstallatIon
180°
X2
X2
Right side of frame Left side of frame
180°
X2
X2
Fig. 14. Inverting the Door Opening Side
180°
X2
X2
Right side of frame Left side of frame
180°
X2
X2
X2
X2
Inverting the Opening Side of the Front Door
Conditions:
Tools and Material:
î
Wrench, size 10
î
Wrench, hex head, size 4
Inversion Procedure:
The frame is fitted with two sets of hinges,
on the left and on the right side. From fac-
tory, the appliance is delivered with the
door hanging on the left hinges. The pro-
cedure below explains how to invert the
opening side of the door.
1. Lift up the center front panel
2. Open the front door (
1
).
3. Using a size 10 wrench, remove top and bot-
tom studs (
2
) from the left side of the front
door (
1
). Retain for reinstallation.
OFF
i
4. On the right side of the frame :
î
release two screws from top & bottom hinges
(
3
). Remove and retain for reinstallation
î
rotate each hinge (
3
) 180° and reinstall
with two retained screws.
5. Lift the front door (
1
) off the left side hinges.
6. Lower the front door (
1
) on the right side
hinges.
7. Using a size 10 wrench, install top and bottom
studs (
2
) on the right side of the front door (
1
).
8. On the left side of the frame :
î
release two screws from top & bottom hinges
(
3
). Remove and retain for reinstallation.
î
rotate each hinge (
3
) 180° and reinstall
with two retained screws
9. Check that front door (
1
) is closing and open-
ing properly.
Follow-on task(s):
1. Close center front panel. Refer to
“Opening
and Closing the Front Door and Access
Panels” on page G-26.
1
1
2
3
3
Top & bottom
Top & bottom
Top & bottom