Page 31 of 83
SK2018 PCG(H)-V/P-AECM-001
B.11.
Branch Duct Connection
The side opening allows branch duct work to be installed.
Dimensions and location for connection are shown in Figure B.11.1 and Figure B.11.2.
Flanges and conduits can be installed to casing.
Conduits can be flexible polyester with spring core or corrugated aluminum externally insulated.
Branch duct flange and blanking plates are available as separate accessories items.
Figure B.11.1
Figure B.11.2
Installation Procedures:
1.
Look for the yellow sticker on the casing for the location of branch duct connections.
2.
Use a cutter and follow along the pre-cut circular marking as shown and trim off the insulation.
3.
Knock out the pre-cut hole.
4.
Connect the flange to the opening with 4 tapping screws (
Ø
1/8 x 1/2).
Figure B.11.3
(All dimensions are approximate within 1/16 of an inch of those indicated.)
Содержание SUPERIOR PCG-04-V
Страница 1: ...SK2018 PCG H V P AECM 001 ...
Страница 36: ...Page 35 of 83 SK2018 PCG H V P AECM 001 For Twin Fan Unit ...
Страница 85: ...Page 84 of 83 SK2018 PCG H V P AECM 001 ...