AHRI OM 210 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 82

background image

Printed in U.S.A.



Copyright 2017, by Air-Conditioning, Heating,

and Refrigeration Institute

Registered United States Patent and Trademark Office

PREFACE

The  following  manual  outlines  the  procedures  and  policies  of  the  Performance  Certification  Program  for
AHRI Unitary Small Air-Conditioners (including mixed-match coils) (USAC) and the AHRI Unitary Small Air-
Source Heat Pumps (including mixed-match coils) (USHP) operated by the Air-Conditioning, Heating, and
Refrigeration Institute (AHRI). This manual is to be used in conjunction with the AHRI General Operations
Manual for AHRI Certification Programs.  Where the AHRI General Operations Manual and this product-
specific manual differ, this product-specific operations manual shall prevail.

The revision of this manual supersedes all previous revisions.  The current edition of this manual, as well
as the AHRI General Operations Manual, can be accessed through the AHRI website,

www.ahrinet.org

.

The USAC and USHP Certification Program by AHRI provides for independent verification of the USAC
and USHP manufacturers

’ stated equipment performance. Safety criteria are not within the scope of this

program.

Participation in the program is voluntary. Any manufacturer, regardless of AHRI membership, may obtain
approval of Program Ratings and use of the AHRI USAC and USHP Certification Marks hereinafter referred
to  as  the  “Marks”.    The  Marks  are  the  Participant’s  public  representation  that  the  ratings  of  randomly
selected  units  have  been  verified  by  an  independent  laboratory  in  accordance  with  test  procedures
prescribed by this operations manual.  A Certification Agreement is executed between the manufacturer
and AHRI specifying the conditions under which such Ratings and the Mark may be used.  No manufacturer
has the right to use Program Ratings or to state that their products have been tested in conformance with
the procedures outlined in this Rating Procedure unless and until they have received written authority from
AHRI to use the Marks as applied to the specific approved Program Ratings.

This Operations Manual has been prepared to assure that administration of the program is carried out in a
uniform manner.  It is an amplification of the license agreement signed by licensees and AHRI.  General
information, procedural details, and copies of forms are included in this Operations Manual.  Provisions of
the Operations Manual may be amended as provided in the Certification Agreements.

This  certification  program  complies  with  requirements  of  the  ISO/IEC  Standard  17065:2012,

General

Requirements for Bodies Operating Product Certification Systems.

Note:

This manual supersedes the AHRI Unitary Small Air-Conditioners (including mixed-match coils) and AHRI

Unitary Small Air-Source Heat Pumps (including mixed-match coils) Certification Program Operations

Manual, USE OM March 2015.

«
1
2
3
4
...
»

Содержание OM 210



















































































Отзывы:

Нет отзывов

Похожие инструкции для OM 210

Бренд: FACTO Страницы: 27

SkyAir FBQ18PVJU

Бренд: Daikin Страницы: 10

Бренд: Danby Страницы: 12

Бренд: Daikin Страницы: 132

Бренд: MCS Страницы: 68

Fellini 13-04540

Бренд: Sunrise Tradex Страницы: 18

23-23-0381N-002 s

Бренд: Fedders Страницы: 20

Бренд: Hantech Страницы: 180

Бренд: Odorox Страницы: 12

Бренд: Technibel Страницы: 27

Бренд: Ocean Breeze Страницы: 28

Бренд: BestAir Страницы: 12

Бренд: Magnum Industrial Страницы: 6

Бренд: AERMEC Страницы: 48

Бренд: TCL Страницы: 37

Бренд: Convair Страницы: 16

Бренд: Daikin Страницы: 64

Бренд: Daikin Страницы: 24

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды