Functions
Software
Each ALMEMO
®
Manual is accompanied by the AMR-Control software pack-
age, which can be used to configure the measuring instrument and to program
the sensors . Using the integrated terminal, measuring operations can also be
performed online. The WINDOWS
®
software package WIN-Control is provided
for the purposes of measured value acquisition via networked devices, for
graphical presentation, and for more complex data processing.
6. INITIAL COMMISSIONING
1. Connect sensor
to socket
M0
(1);
see 8.
2.
Ensure that the power supply
is provided by 3 AA batteries or mains adapter;
3.
To switch ON
press key
ON
(6);
see 7.5
4.
Select measuring channels
by pressing key
M
▲
(6), read out measured
values (5e);
see 10.1.1
5.
Save the measured value
by pressing key
MEM
(6);
see 10.3
6.
Relative measuring
to a reference value by pressing key
CLR
(6)
Revert to normal measured value by pressing and holding down key
CLR
7.
Evaluating a measuring operation
Call up maximum / minimum values by pressing keys
MAX
/
MIN
(6)
To delete max. / min. value(s) press and hold down key
MAX
or
MIN
see
8.
Programming
or
data output
via interface (option)
Connect computer via interface cable to socket A1:
see Manual 5.2.
Activate supplied software AMR-Control.
Via ‘Setup interface’ set the COM port and transmission rate to 9600 bauds.
Program the sensors via ‘Program measuring point list’.
Measured value display and sensor adjustment via ´Measuring points -
Measured values´
Data logging on the computer :
Program the cycle via ´Devices - Programming´
Open the terminal window via ´File - Terminal´
´File - Terminal - Open log ´, enter file name, ´Save´
Start the measuring operation by click ´Start´
Stop the measuring operation by click ´Stop´
´File - Terminal - Close log´
Activate file e.g. from MS-Excel and import using ´;´ as separator;
see Manual 6.1.4.
ALMEMO
®
2450-1
13
