Agria Bison 5900 Series Скачать руководство пользователя страница 70

Страница: 70 / 92

5 Maintenance and Repair

Hydrostatic Implement Carrier

agria 5900 Bison

Storage

If the machine is out of operation for an extended period:

(1)

Clean

. Touch up the paint.

(2) Spray

all bare parts

and mower head with bio corrosion-inhibiting oil.

(3)

Preserve the engine.

Petrol engine

•

Completely drain the fuel outdoors into a suitable container.

Petrol is highly flammable and explosive under certain conditions!

Never smoke in the working area. Stay away from naked flames and

sparks.

Alternatively

fill the fuel tank completely and add a fuel stabilizer (Agria no.

799 09) to the fuel

- Observe the operation instructions!

Let the engine run for approximately 10

minutes.

•

Change engine oil.

•

Fill a teaspoon (approximately 0.03 l) of engine oil into the sparking-plug hole.

Slowly crank the engine.

•

Reinstall the sparking plug and set the piston with the cable-pull starter to com-

pression (slowly pull at the starter handle until you can feel resistance). The

valves are now closed.

•

Slowly crank the engine every 2...3 weeks (sparking-plug connector removed!)

and set the piston back to compression.

Diesel engine

•

Change engine oil.

•

For an extended storage time close exhaust openings and air inlet openings at

the air filter with masking tape or something similar.

Содержание Bison 5900 Series





























































































Результаты поиска

Содержание Bison 5900 Series

Отзывы:

Похожие инструкции для Bison 5900 Series

Бренды по названию

Популярные бренды

Agria Bison 5900 Series, Перевод оригинальной инструкции по эксплуатации

Результаты поиска

Содержание Bison 5900 Series

Отзывы:

Похожие инструкции для Bison 5900 Series

Бренды по названию

Популярные бренды