Agria Bison 5900 Series, Перевод оригинальной инструкции по эксплуатации

Страница: 60 / 92

5 Maintenance and Repair
60 Hydrostatic Implement Carrier agria 5900 Bison
Fuel hoses
Replace every 2 years . Replace leaking plastic hoses immediately.
Air cooling system
After long periods of operation, the cooling sys-
tem can be obstructed with dust or plant parti-
cles. Continuous operation with an obstructed
cooling system causes the engine to overheat,
and can damage the engine.
Never spray water on the engine. Use a brush or
compressed air.
•
Continually check the fan grille (D/7), and
remove aspirated dirt and plant debris.
•
Remove the fan housing after every 100
operating hours or at least yearly , ideally
before the season. Clean the cooling fins on
cylinder and cylinder head, and the deflector
plates and the fan wheel that are necessary
for air circulation.
- agria-Service -
Exhaust
•
Continually check the exhaust system (D/9)
for contamination and plant parts. Failure to
do so can lead to
fire hazard!
Check before each start-up.
Replace damaged exhaust parts.
Handle hot engine components with caution!
The silencer and other engine parts get very hot
when the engine is running and are still hot di-
rectly after the engine is switched off. Keep a
sufficient distance from hot surfaces and keep
children away from the running engine.