Agria Bison 5900 Series, Перевод оригинальной инструкции по эксплуатации

Страница: 43 / 92

4 Commissioning and Operation
Hydrostatic Implement Carrier agria 5900 Bison 43
Starting the petrol engine
1. Open the fuel cock (C/13)
2.
Cold
engine: Set CHOKE actuator (C/20) to
"CHOKE". Reset CHOKE when the engine is
hot
Engine at operating temperature : Leave
CHOKE in normal operating position
3. Set speed regulating lever (B/9) to max.
4. Safety lever (B/4) in stop position (released) ,
drive lever (B/10) in position "0"
5. Insert the ignition key into the ignition lock
(B/12) and turn it clockwise to position " I " -
even if you start the engine with cable-pull
starter
6. Start the engine from outside the hazard
zone:
- Continue turning the ignition key clockwise
to "START" position
As soon as the engine starts, release the ignition
key. The key returns automatically to the " I " posi-
tion.
If the engine does not start, turn the ignition key
back to position " O " before you try again to start
(start repetition lock).
- Or manual start with cable-pull starter
Tow-start is not permitted!
7. Once the engine is running, set the engine
speed to min and allow the engine to warm
up for a short time. Slowly move the choke
actuator back to operating position (if actuat-
ed).