26
agria
Brush Cutter 8000
4.10 Notes for Mowing/Mulching
The rotary mulcher is intended for the maintenance of grass areas which are
mowed at irregular intervals. The mulching machine reduces the grass to small
pieces which are left in an evenly distributed manner on the mowed area. Therefore
the leftover grass does not collect in piles in one area and it serves as a natural
form of manure.
Procedure for Mulching
Frequency of mulching: Mulching should be carried out 3 - 4 times per year. The
first mulching should be carried out at the beginnning of the vegetation period and
the last mulching at the end of the vegetation period. Addition mulching should be
made dependent on the conditions for the growth of the grass.
Mulching method: Mulch grass which has grown up to 25 cm in height in one
single pass - set the cutting height dependent on the strength of growth of the
grass.
Mulch grass which has grown higher than 25 cm in two passes, see fig.. Set the
cutting height to the higher position II for the first pass, see chapter 3.9
èp
page
18. For the second pass the cutting height can be lowered to the position I.
4.Commissioning and Operation
If the area to be mowed is too thick, overgrown, is rotten or trodden down
underneath, it will be necessary to reduce the working width to a suitable amount
so that the cuttings do not begin to build up in front of the brush cutter.
If this still happens, switch off the travelling drive so that the brush cutter can
expel the cuttings which have gathered together. However, if a blockage should
occur, both the travelling and the mowing drive must be switched off, the motor
brought to rest and the space cleaned.
The cutting height is governed by the runners and cannot be adjusted. The runners
follows the form of the ground. It can therefore happen that when mowing highly
uneven areas the cutting height in the whole field is inconsistent.
When mowing please ensure that the runners are always touching the ground.
1. run
2. run
4
Содержание 8000 511
Страница 33: ...agria Brush Cutter 8000 33 ...
Страница 39: ...agria Brush Cutter 8000 39 6 Conformity Declaration ...
