Agria 8000 511, Руководство по эксплуатации

Страница: 14 / 40

14
agria
Brush Cutter 8000
3
3. Devices and Operating Elements
The brush cutter agria type 8000 is
suited for the cutting of grass and similar
plants as well as thin non-woody scrub
in land and forest management, green
spaces and other such areas. However it
is unsuitable for lawn areas in parks! (due
use).
3.1 Engine
The four-stroke petrol engine runs on
commercial petrol (refer to fuel recom-
mendations p6).
During the first 20 operating hours
(break-in period) do not use engine to
maximum power.
Even after break-in period never use
engine at higher speed than necessary
for the work in hand.
I
High engine speed is harm-
ful to any engine and con-
siderably affects its durability. This
applies especially for no load opera-
tion. Any overspeed (have the engine
roar) can result in immediate dam-
age.
Cooling System
The cooling system is fan-cooled. There-
fore keep screen at recoil starter and
cooling fins of cylinder clean and free
from sucked-in plant trash.
Idle running speed
Always ensure that idling-speed is ad-
justed correcty. With the speed control
lever set to idle, the engine is supposed
to run smoothly and without run-out at
low engine speed.
Air Filter
The air filter purifies the air intake. A
clogged filter reduces engine output.
Ignition System
The engine is equipped with a mainte-
nance-free, contactless electronic igni-
tion system.
We recommend to have necessary
check-ups done by an expert only.
Choke
The operation of the choke is built into
the speed control lever.
Close the choke for cold starts.
Open the choke for warm starts
and operation.
Fuel tap
The fuel tap (B/11) is on the
carburetor.