Agria 8000 511, Руководство по эксплуатации

Страница: 10 / 40

10
agria
Brush Cutter 8000
During operation the operator must keep
at a distance as defined by the steering
handle, especially when turning the
machine.
Riding on the implement during opera-
tion or in transport is not permitted.
If clogging occurs in the cutting section,
turn off the engine and clean the cutting
section with an appropriate tool.
In case of damage to the brush cutter,
immediately turn off the engine and have
it repaired.
If steering causes problems, immedi-
ately bring the brush cutter to a halt and
turn it off. Have the malfunction removed
without delay.
To prevent the brush cutter from sliding
on slopes, make sure it is secured by
another person using a bar or a rope.
This person must be located at a higher
position than the vehicle and at a safe
distance from the attachment at work.
If possible, always work horizontally on
the slope.
End of Operation
Never leave the brush cutter unattended
with the engine running.
Before you leave the brush cutter, turn
off the engine.
Secure brush cutter against unauthor-
ized use. If brush cutter is equipped with
ignition key, remove the key. For all other
versions, remove spark plug connector.
Mowing Attachment
Handle with care! Sharp blades of the
mowing knives may cause injuries!
To exchange the mowing knife make
sure that you turn screws away from
cutting edges.
For grinding the mowing knives, always
wear safety goggles and gloves.
Maintenance
Never carry out any maintenance or
cleaning with the engine running.
Before you work on the engine, always
remove spark plug connector (petrol
engine only).
Check regularly and, if necessary, re-
place all protecting devices and tools
subject to wear and tear.
Replace damaged cutting tools.
Always wear safety gloves and use
proper tools when exchanging cutting
tools.
Do not carry out repairs like welding,
grinding, drilling, etc. on structural and
safety-relevant parts (e.g. coupling de-
vices)!
Keep brush cutter clean to avoid risk of
fire.
Check nuts and screws regularly for tight
fit and re-tighten, if necessary.
After maintenance and cleaning, ensure
that you re-install all safety and protec-
tive devices and adjust them properly.
Only use original agria spare parts. All
other commercial spare parts must cor-
respond to quality and technical require-
ments specified by agria.
1. Safety Instructions
1