Agria 8000 511, Руководство по эксплуатации

Страница: 28 / 40

28
agria
Brush Cutter 8000
5.6 Gearbox
l The driving gearbox must be constantly filled
with SAE 90 gearbox oil.
l When cleaning always check if any oil has
escaped from the gearbox. The inspection can
be carried out through the two "peep-holes" in
the rear part of the housing cover (D/6).
l If any oil has been found to have escaped,
this must be removed immediately.
è - Service ç
5.7 Drive-wheels
l Remove the drive wheels from the axle at
the end of the season and clean them.
l
Fill up the inner part of the hub (E/1) with
new grease.
l Thoroughly lubricate the ground face of the
bearing (E/2) and the surfaces of the overriding
clutch (E/3).
l
For full tractive power, mount wheels (A/15)
with pointed parts of lugs showing in travel di-
rection (wheels seen from above).
l
Do not pull the nut (E/4) up to its limit - the
wheel must be able to turn with a little play.
l
Secure the nut with a new split-pin.
l
Check the tyre air pressure (0.8 bar) regu-
larly. For smooth driving, make sure that there
is the same pressure in both tyres.
5.8 Bowden Cables
l Thoroughly lubricate the Bowden cables with
Silicone oil.
5. Maintenance
D
E
1
2
3
5
4
A/15