24
agria
Power Hoe 1000
4. Commissioning and Operation
Hoeing
W
Check safety circuit function - Only operate
the machine if the safety circuit is working!
Wear individual protective ear plugs and safety
shoes.
Before you start working, remove all hard objects
from the area to be cultivated. While working,
watch out for hard objects.
Before moving off, check the immediate surround-
ings, e.g. for children.
Start the engine as specified in chapter “Starting
the Engine”
1. Flip locking ratchet upwards
2. Push safety lever (A/19) downwards
3. At the same time, increase the engine speed using
the speed control lever (A/18).
The hoeing tools start rotating.
To adjust the desired working depth, set the depth bar to
one of the two depth settings (see chapter "depth bar").
Do not transport or move the power hoe with the
hoeing tools still rotating and on concrete and as-
phalted ground. Instead, use the front wheel and shut
off the engine.
To clean and exchange the hoeing tools, only
recline the machine backwards onto the handle-
bar (before, remove the depth bar).
Danger zone
W
Keep out of the machine’s danger zone
during starting and operation.
W
Warning: Do not clean the hoeing tools while
the engine is running. Shut off the engine and
remove the spark plug connector. Remove jammed
objects only by means of tools, e.g. a wooden stick.
Working on slopes
During slope operation, always turn the machine
towards the slope.
Gefahren-
bereich
max. 20°
(37%)
22
1.
2.
3.
W
4
16
