agria
Power Hoe 1000
29
5. Maintenance
Cooling fan grille
After prolonged operation, the cooling system
may become clogged by dirt etc. To avoid any
overheating and damage to the engine, regu-
larly clean the cooling fan grille (A/3).
Check before each operation!
Air cooling system
1) Clean the rotating strainer at 50-hour inter-
vals as a minimum (earlier in very dusty and
trashy conditions). To do this, remove the re-
coil starter. See the illustration below.
2) Clean the internal cooling fins and surfaces
at 100-hour intervals as a minimum (earlier in
very dusty and trashy conditions).
è
-
Service
ç
Governor
For smooth engine performance keep gover-
nor linkages, springs and actuating devices
clean and free from dust and dirt. Do not bend
or twist parts. (Governor linkages on carburetor
A/6).
Exhaust system
Regularly clean the area arround the exhaust
(A/9) from grass, dirt, and inflammable depos-
its.
– Risk of fire!
Check before each operation.
Speed Control
Devices for actuating engine speed must be
adjusted correctly to start, operate and shut
off the engine at correct speed rates.
è
Honda engine operating instructions
or
è
-
Service
ç
1.)
2.)
6
6
6
6
6
A
6
6
6
6
6
A
6
6
6
6
6
50 h
6
6
6
6
6
100 h
A/9
5
