agria
Power Hoe 1000
19
3. Machine and Operating Elements
Depth bar
The depth bar (A/24) slows down the power
hoe’s forward speed. The working depth is
set by adjusting the depth bar as required.
The deeper the depth bar setting, the
deeper the working depth of the hoeing
tools. There are two holes to set the bar
(A/24) to the desired depth. Secure it with
the R-clip (A/23).
Optional depth bar
This depth bar (accessory no. 1001 511)
(S) is available as an option to improve
depth control in loose soils. Remove the
standard depth bar (A/24) and replace it
by the optional depth bar, locking it with
the R-clip (A/23).
Front wheel
For easier transport, use the front wheel
(A/14). Push the wheel’s axle into the re-
ceiving bearing (B) and attach it with the
pressure spring, washer and split pin in the
order illustrated.
You can leave the wheel on the machine
during hoeing, if you pivot it up into hoeing
position.
Hoeing position:
l
Pull the handle
to unlock the bracket
l
Pivot the bracket up and lock it.
Travelling position:
l
Correspondingly, pivot the bracket down
and lock it.
3
A/14
B
A/23
A/24
A/23
S
