18
agria
Power Hoe 1000
3. Machine and Operating Elements
Hoeing tools
1 Hexagon nut
2 Linch pin
3 Star washer
4 Extension guard
5 Guard discs
6 Add-on hoeing tool
7 Hex head bolt
8 Base hoeing tool, right
9 Countersunk bolt
10 Base hoeing tool, left
Example: Hoeing width 70 cm
Example: Hoeing width 50 cm
S = Blade
Working width:
Base hoeing tools: ....... approx. 50 cm
Base hoeing tools and
add-on tools: ................ approx. 70 cm
Fitting the hoeing tools
W
Only fit/remove the hoeing tools
while the engine is shut off and
the spark-plug connector is removed!
Wear safety gloves!
50 cm working width:
l
Fit the base hoeing tools (8 and 10)
onto both ends of the hoeing shaft.
Ensure that the blades point into travel-
ling direction. When fitting the second
hoeing tool (either left or right), make
sure the knives pointing to the housing
are fitted in a staggered way to the
knives fitted on the opposite end of the
shaft.
l
Attach the hoeing tools to the shaft
using the hex head bolts (7) that go in
the holes on the hubs and shaft.
70 cm working width:
l
Fit the hoeing tools in the same way
as described in 50 cm working width.
l
Fit the add-on tools (6) in the hubs of
the base tools.
l
Secure them with the linch pin (2)
which is inserted in the holes on hub
and shaft (linch pin pointing in the con-
tra-rotating direction).
l
Attach the extension guards (4) us-
ing attachment bolts (9, 3 + 1).
Guard discs
The discs are to prevent shrubs and
bushes from being damaged by the hoe
and to protect young plants from being
covered with soil. In addition, they offer
protection for the operator when hoeing
along field edges or fences.
l
Fit the guard discs (5) in the outer
hubs on the hoeing tools.
l
Secure them with the linch pin (2)
which is inserted in the holes on hub
and shaft.
3
