10
TROUBLESHOOTING
Wheels skid when sweeping
1. Brushes set too low.
1. Adjust height till brushes are 1/2" down into grass.
2. Brushes are jammed.
2. Stop sweeper. Remove obstruction.
3. Wheels are jammed.
3. Remove one wheel at a time to check for obstruction or
damage Refer to Service and Adjustments section.
MAINTENANCE SCHEDULE
Fill in dates as you
complete regular service.
Check for loose fasteners
X
Check for worn or damaged parts
X
X
Lubricate brush shaft bearings
X
Lubricate wheel bearings
X
Clean Sweeper
X
X
Clean/Lubricate chain and sprockets
X
Bef
ore each use
After each use
Twice a y
ear
Ev
ery season
Bef
ore stor
age
Ev
ery tw
o y
ears
Service Dates
CUSTOMER RESPONSIBILITIES
Read and follow the maintenance schedule and the procedures listed in the maintenance section.
MAINTENANCE
SCHEDULED MAINTENANCE
1. Clean the sweeper after each use.
2. Inspect for worn or damaged parts, such as brushes
and wheels.
3. Lubricate the brush shaft bearing twice a with a few
drops of light weight oil.
4. Every two years, remove wheels and clean sprockets
and gears found inside the wheel housing. After
cleaning, lubricate with an even coat of light grease.
To remove the wheel, pop off the hub cap using a
SCREWDRIVERANDREMOVETHELOCKNUTANDÛATWASHER
CLEANING
1. Clean sweeper housing with a soft brush or cloth.
2. Clean debris from hopper bag with a brush or broom.
3. Remove any material which has wrapped around
brushes or ends of brush shaft.
