4
To lock the bag arm channels into position, secure
2.
each of them to the side of the sweeper housing
with a 5/16-18 x 3/4" hex bolt (17), a 5/16" jam nut
(25) (between the bag arm channel and the sweeper
housing) and a plastic wing nut (31). See figure 2.
Slide a pivot rod retainer (30) into each end of the
3.
bag arm channels. See figure 3.
Insert a compression spring (32) into the bottom of
4.
each of the pivot rod retainers to secure them to the
bag arm channels. See figure 3.
FIGure 2
FIGure 3
FIGure 4
FIGure 5
Attach the drawbar (14) to the sweeper by fastening
5.
a drawbar bracket (8) above and below the drawbar
with three 5/16" x 2-1/2" hex bolts (15) and 5/16"
nylock nuts (21). See figure 4.
Lock the drawbar into position by inserting a 3/8" x 3"
6.
hitch pin (20) into the center hole and securing it with
a 3/32" cotter pin (19). See figure 5
17
31
25
20
19
8
15
14
21
8
30
32
Содержание 45-0456
Страница 21: ...21...
