10
AGM Global Vision
2.1.6 USB CABLE CONNECTION
The USB cable enables connect the device to your PC to export the recorded videos and
captured snapshots, use the external power source (power bank, 5V USB) for extended
operational time, update the device’s firmware to the latest version.
Connect the external battery as follows (refer to Figure 2-7):
1. Open the cover of the Anaconda-Micro connectors.
2. Plug the USB cable to the micro-USB connector of the Anaconda-Micro. Plug the
other end of the cable to the external battery.
WARNING:
Do not disconnect the cable during data transfer.
2.1.7 INSTALLATION OF THE INTERCHANGEABLE OCULAR (OPTIONAL)
The interchangeable ocular converts the Anaconda-Micro into a 2.6x thermal imaging
monocular for middle range observation.
To install the ocular to the Anaconda-Micro, do the following:
1. Take off the day scope adapter if it installed.
2. Screw the ocular part onto the Anaconda’s attachment place thread.
3. Turn on the device and adjust the focus by rotation the diopter adjustment ring of
ocular.
FIGURE 2-7. USB CABLE CONNECTION
FIGURE 2-8. TRANSFORM TO MONOCULAR
