19
Anaconda-Micro
USER MANUAL
4. Long press the joystick up to enter main menu. Short press the joystick up to enter
Alignment sub-menu.
5. Press the joystick Left/Right to move between X, Y, and EXIT. Press the joystick Up to
change positive value (X+, Y+), press the joystick Down to change negative value
(X-, Y-).
Anaconda-Micro is preset in position X:0, Y:0.
When the point of impact with Anaconda-Micro is on the right side of previous point
of impact (previous aiming position), change value X (X- => press the joystick Down),
decrease X value, and vice versa.
When the point of impact with Anaconda-Micro is on the Upside of previous point of
impact (previous aiming position), change value Y (Y- => press the joystick Down), de-
crease Y value, and vice versa.
While using the Alignment Correction is shown value of axis X and Y, one step for cam-
era Anaconda-Micro means 1.16 MOA = 3.4 cm on 100 m distance.
6. The setting is saved by selection EXIT icon and pressing press the joystick Up/Down.
7. Control if the value is save correctly.
2.3.8 SHUT DOWN OPERATIONS
To prepare the device for storage:
1. Turn the device OFF. Push and hold the operation joystick.
2. Place the protective cover over the objective lens.
3. Disconnect the cable or adapters (if applicable). Place the protective caps over the
connector sockets.
4. Return the scope and any accessories to the case.
