20
AGM Global Vision
2.3.9 MAINTENANCE
1. Gently brush off any dirt from the body of the device using a clean, soft cloth.
2. Moisten the cloth with fresh water and gently wipe down the external surfaces (ex-
cept lenses).
3. Dry any wet surfaces (except lenses) using another dry, clean, soft cloth.
4. Using a lens brush, carefully remove all loose dirt from the lenses.
5. Dampen a cotton swab with ethanol and slowly, gently wipe down the lenses. Clean
the glass surfaces using circular movements, starting from the center of the lens and
moving out towards the edge, without touching the lens holder. Change the cotton
swab after each circular stroke. Repeat this step until the glass surfaces are clean.
2.3.10 PREPARING FOR EXTENDED STORAGE
To prepare the Anaconda-Micro for extended storage:
1. Remove the batteries.
2. Clean the device and accessories.
3. Place all items into the storage case.
