9
Anaconda-Micro
USER MANUAL
Install the Anaconda-Micro on the lens of a day scope as follows (refer to Figure 2-5):
1. Screw the day scope adapter (A) onto the Anaconda’s attachment place thread (B).
2. Turn the lever (C) backwards to loosen the adapter clamping device.
3. Slide the Anaconda-Micro with the DSA onto the lens of the day scope as far as it
goes.
4. Turn the nut (D) CW/CCW respectively for adapter’s size adjustment.
5. Affix the DSA to the day scope by locking the lever (C). Verify that the clip-on is firmly
secured to the day scope. If necessary, readjust the clamping device by turning the
nut (D).
2.1.5 VIDEO CABLE CONNECTION
Video cable serves for the connection with an external display monitor. Install the cable
refer to Figure 2-6.
Open the cover of the Anaconda-Micro connectors. Plug the cable to the mini-jack
3.5 mm connector.
A
C
B
C
D
FIGURE 2-5. CLIP-ON INSTALLATION
FIGURE 2-6. VIDEO CABLE CONNECTION
