AGL Twister VT Series, Руководство пользователя

Страница: 49 / 52

PROBLEM REASON SOLUTION
Remove and Reconnect Hoses.
Hydraulic Sockets Not Fitted
Relocate the Hoses and Try
Piston Not Working. Hydraulic Sockets are Wrongly Connected Again.
Piston Seal is Worn Check the Piston Seals.
If the Problem Persists, Apply to the
Technical
Service.
Contact Technical Service.
Oil Leakage
Leakage Due to the Gearbox
Check hydraulic line equipment
Leakage Due to the Hydraulic Equipment tighten the loose fittings,
replace the smashed, broken or split
products.
Hydraulic System is not
Working
Hydraulic System Oil Insufficient
Check System Oil.
Inform Technical Service Regarding the
Compatibly.
Piston Overloaded
Synchronization Problem.
Shaft Revolution Low, Set to 540 rpm.
Stop the tractor completely and
Metal object jammed in the auger body
and fix the jamming problem. Remove
the
Auger Does not Move or
jammed object.
Lubricate from greasing points, Works Slowly.
No Oil in the Roller Bearings
if the bearing is locked, ask the service
to replace the bearing.
Noise or jam in the gearbox
Contact Technical Service, Do Not
Intervene.
My AGL Machine Started to
Operate
No Oil in the Gearbox.
Supply the Oil, For Which the Details are
Given in the
With Extra Noise
Information Section Without Losing
Time.
Excessive Motion in Bearings
Check the Motion And If Necessary
Tighten Or Replace
Noise in Axle Hubs Bearing Working Problem Replace the Bearing
Damaged Hub Parts Replace the Parts.
Incorrect Hydraulic Oil Usage Check the oil quality / change the oil.
Hydraulic System Failure Insufficient tractor hydraulic pump output Check the tractor hydraulic pump
Damaged hydraulic pipes and leakage problem
Make sure that the hydraulic pipes are
tightened and firm
49