background image

WARRANTY

EXPRESS  WARRANTY  FOR  HARDWARE.  AGL  Corporation  (“AGL”)  warrants  to  the  original  end  user 
(“Customer”) that this Product will be free from defects in workmanship and materials, under normal use, for 
one (1) year and non-AGL-manufactured products for which ninety (90) days shall apply, unless such warranty 
period  has  been  extended  by AGL,  and  provided  any  and  all  operating  and  maintenance  instructions  are 
strictly  respected,  in  particular  in  case  of  extreme  and/or  continuous  applications/use  of  the  Product. The 
warranty period begins on the proved purchase date, or if applicable, date of delivery or date of acceptance 
report. AGL’s sole obligation under this express warranty shall be, at AGL’s sole option and expense, to replace 
or repair the Product or part, or refund the purchase price paid for the Product. AGL warrants any repaired 
or replaced Product or part for a period of ninety (90) days from shipment, or through the end of the original 
warranty, whichever is longer. All Products or parts that are replaced become the property of AGL. This express 
warranty does neither cover consumables, such as batteries, bulbs and fuses, nor third party products. 

OBTAINING  WARRANTY  SERVICE.  Customer  must  contact  an  authorized  service  center  of  AGL  or  AGL’s 
Service Center within the applicable warranty period to obtain warranty service authorization. Dated proof of 
original purchase from AGL’s authorized distributor and a description of the defect will be required. AGL is not 
responsible for Products or parts received without a warranty service authorization. Repaired or replacement 
Products will be shipped to Customer at AGL’s expense. The repaired product or part will be shipped as soon 
as reasonably possible. AGL shall not be responsible for any damages occurring during such shipment.  For 
Products forming part of a fixed installation, such place of performance shall be the site of such installation 
and AGL shall have the right to charge for additional costs for such services under warranty if the site of the 
Product is other than where the Product was originally shipped or installed.

WARRANTY EXCLUSIVE. Customer’s sole remedy for breach of the warranty shall be the express warranty. 
The  foregoing  warranty  is  exclusive  and  is  in  lieu  of  all  other  warranties,  terms,  or  conditions,  express  or 
implied, either in fact or by operation of law, statutory or otherwise, including warranties, terms or conditions 
of merchantability, fitness for a particular purpose, satisfactory quality and non-infringement, all of which are 
expressly disclaimed.  AGL shall not be liable if the alleged defect or malfunction was caused by Customer’s 
or any other person’s misuse, neglect, improper installation, unauthorized attempts to open, repair or modify 
the Product, inadequate maintenance, disregard of operating instructions, excessive load or stress, normal 
wear and tear, or any other cause beyond the range of its intended use, by accident, fire, or other hazards, 
or other cause not due or attributable to AGL. This warranty does not cover physical damage to the Product 
or malfunctions resulting from the use of the Product in conjunction with any sort of ancillary or peripheral 
equipment and AGL determines that there is no fault with the Product itself.

LIMITATION  OF  LIABILITY.  AGL  also  excludes  any  liability,  whether  based  on  contract  or  tort  (including 
negligence),  for  incidental,  consequential,  indirect,  special,  or  punitive  damages  of  any  kind,  or  costs  of 
procurement  of  substitute  products  by  customer,  or  for  the  loss  of  revenue  or  profits,  loss  of  business, 
loss of information or data, or other information or financial loss arising out of or in consequence with the 
sale, installation, maintenance, use, performance, failure, or interruption of this product, even if AGL or its 
distributors have been advised of the possibility of such damages, and limits its liability to replacement, repair, 
or refund of the purchase price paid, at AGL’s option. This limitation of liability for damages will not be affected 
if any remedy provided herein shall fail of its essential purpose. 

DISCLAIMER. Should a court of jurisdiction not allow the entire exclusion or limitation of implied warranties 
or the limitation of incidental or consequential damages for certain products supplied to Customers, or the 
limitation  of  liability  for  personal  injury,  such  implied  warranties  and  such  liabilities  will  be  limited  to  the 
duration of the applicable express warranty. 
With  this  Limited Warranty, AGL  grants  Customer  specific  legal  rights  which  do  not  restrict  any  statutory 
consumer rights. This Limited Warranty shall be governed by the laws of Arkansas, USA.   

25

Содержание GradeLight 2700





























Отзывы: