Entering a Grade
The grade range is from +40% to -10%. Grade can be set in increments as small as .001% using
the digit select or rolling counter entry method.
The display lights when entering grade. The LCD is color coded to match the grade entry
button: green for positive grade and red for negative grade.
Digit Select Grade Entry
Press ENT.
The first digit flashes.
Select positive or negative grade. The first digit will continue to
flash. To the left of the decimal is a whole unit of per cent grade; to
the right of the decimal are tenths, hundredths, and thousandths.
Change the value of the first digit with the grade buttons (+ to
increase,
—
to decrease). For large changes hold the button.
Use the azimuth left or right arrows to move through the digits and
to choose the next digit to be changed. The digit you’re working
with will flash like a computer cursor. Use the + and
—
buttons
again to change the value.
After the desired digits have been chosen, press ENT to save, and
begin the grade that’s been set.
The LCD beam symbol flashes until the grade setting is reached.
Rolling Counter Grade Entry
For a positive grade, hold the + button for 15 seconds or more. After you release, it will auto-
matically increase in grade until you push either the + or
—
button again to stop.
For a negative grade, hold the
—
button as described above.
Automatic Reset to Zero Grade
Press both the + and
—
buttons simultaneously to automatically set the grade back to 0.000%.
6
Increase Decrease
&
